If you are in need of NSN parts such as LSCP270032-1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Hose Assembly Nonmetallic and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Dynamics Land Systems In.
Note : We will not share your information to any third parties.
Each of our NSN 4720014606484 parts like LSCP270032-1 by General Dynamics Land Systems In is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Dynamics Land Systems In and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-460-6484 Item Description: Hose Assembly Nonmetallic | 4720 | 014606484 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Lscp270032-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 40.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 40.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
