If you are in need of NSN parts such as 10503468, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Hose Air Breathing and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Dynamics Land Systems Ca.
Note : We will not share your information to any third parties.
Each of our NSN 4720008292760 parts like 10503468 by General Dynamics Land Systems Ca is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Dynamics Land Systems Ca and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-829-2760 Item Description: Hose Air Breathing | 4720 | 008292760 | S | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 10503468 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAGT | WALL THICKNESS | 0.250 INCHES NOMINAL" |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL FIRST END" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES" |
| AGAV | END ITEM IDENTIFICATION | POLYKEN DIV. OF KENDALL CO; FILTER UNIET" |
| AGQM | END OVERALL LENGTH | 1.000 INCHES NOMINAL SECOND END" |
| AGQM | END OVERALL LENGTH | 1.438 INCHES NOMINAL FIRST END" |
| AHNC | CONNECTION STYLE | ROUND BOTH ENDS" |
| AMPY | HOSE WEIGHT | 5.000 OUNCES PER LINEAR FOOT" |
| AWLS | CONNECTION TYPE | ERR-030 FIRST END" |
| AWLS | CONNECTION TYPE | ERR-030 SECOND END" |
| CBBL | FEATURES PROVIDED | OZONE RESISTANT" |
| CPYG | END INSIDE DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 24.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | RUBBER AND SYNTHETIC RUBBER BUSHING INSERT AT EACH END" |
| MATT | III MATERIAL | COTTON AND COTTON 1ST PLY" |
| MATT | III MATERIAL | COTTON AND RUBBER 2ND PLY" |
| MATT | III MATERIAL | PLASTIC COVER" |
| MATT | III MATERIAL | RUBBER SYNTHETIC LINER" |
| MATT | III MATERIAL | STEEL REINFORCING WIRE" |
| STYL | STYLE DESIGNATOR | HELICALLY WOUND CONTINOUS WIRE SUPPORTED" |
| TEST | TEST DATA DOCUMENT | MIL-H-0014506G SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING" |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAGT | WALL THICKNESS | 0.250 INCHES NOMINAL" |
| AARX | INSIDE DIAMETER | 0.875 INCHES NOMINAL FIRST END" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES" |
| AGAV | END ITEM IDENTIFICATION | POLYKEN DIV. OF KENDALL CO; FILTER UNIET" |
| AGQM | END OVERALL LENGTH | 1.000 INCHES NOMINAL SECOND END" |
| AGQM | END OVERALL LENGTH | 1.438 INCHES NOMINAL FIRST END" |
| AHNC | CONNECTION STYLE | ROUND BOTH ENDS" |
| AMPY | HOSE WEIGHT | 5.000 OUNCES PER LINEAR FOOT" |
| AWLS | CONNECTION TYPE | ERR-030 FIRST END" |
| AWLS | CONNECTION TYPE | ERR-030 SECOND END" |
| CBBL | FEATURES PROVIDED | OZONE RESISTANT" |
| CPYG | END INSIDE DIAMETER | 0.875 INCHES NOMINAL BOTH ENDS" |
| CRXX | MEASURING METHOD AND LENGTH | 24.000 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | RUBBER AND SYNTHETIC RUBBER BUSHING INSERT AT EACH END" |
| MATT | III MATERIAL | COTTON AND COTTON 1ST PLY" |
| MATT | III MATERIAL | COTTON AND RUBBER 2ND PLY" |
| MATT | III MATERIAL | PLASTIC COVER" |
| MATT | III MATERIAL | RUBBER SYNTHETIC LINER" |
| MATT | III MATERIAL | STEEL REINFORCING WIRE" |
| STYL | STYLE DESIGNATOR | HELICALLY WOUND CONTINOUS WIRE SUPPORTED" |
| TEST | TEST DATA DOCUMENT | MIL-H-0014506G SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING" |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
