If you are in need of NSN parts such as 112C4856, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bracket Angle and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like General Dynamics Advanced Inform.
Note : We will not share your information to any third parties.
Each of our NSN 5340012541405 parts like 112C4856 by General Dynamics Advanced Inform is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as General Dynamics Advanced Inform and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-254-1405 Item Description: Bracket Angle | 5340 | 012541405 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 112c4856 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN" |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL" |
| ADLL | SECOND LEG LENGTH | 1.000 INCHES NOMINAL" |
| AHLF | SECOND LEG WIDTH | 0.688 INCHES NOMINAL" |
| AHLK | FIRST LEG HOLE DIAMETER | 0.152 INCHES MINIMUM AND 0.157 INCHES MAXIMUM" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.688 INCHES NOMINAL" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL" |
| AHPW | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL" |
| AHPX | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL" |
| AHQN | FIRST LEG WIDTH | 1.375 INCHES NOMINAL" |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL" |
| AJZU | FIRST LEG STYLE | SQUARE" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES" |
| AKBU | SECOND LEG STYLE | CHAMFERED ENDS" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL" |
| CWPG | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL" |
| FEAT | SPECIAL FEATURES | SECOND LEG HOLE HAS 2 PROJECTED CUTOUTS,1 CUTOUT 0.188 IN. W,EXTENDS FROM HOLE EDGE TO SIDE,1 CUTOUT 0.095 IN. W EXTENDS TO 0.313 IN. FROM EDGE" |
| MATT | MATERIAL | ALUMINUM ALLOY 6063" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE" |
| SFTT | SURFACE TREATMENT | ANODIZE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE I,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
| ACHY | MOUNTING HOLE TYPE | PLAIN" |
| ADLK | FIRST LEG LENGTH | 0.750 INCHES NOMINAL" |
| ADLL | SECOND LEG LENGTH | 1.000 INCHES NOMINAL" |
| AHLF | SECOND LEG WIDTH | 0.688 INCHES NOMINAL" |
| AHLK | FIRST LEG HOLE DIAMETER | 0.152 INCHES MINIMUM AND 0.157 INCHES MAXIMUM" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.688 INCHES NOMINAL" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL" |
| AHPW | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL" |
| AHPX | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL" |
| AHQN | FIRST LEG WIDTH | 1.375 INCHES NOMINAL" |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL" |
| AJZU | FIRST LEG STYLE | SQUARE" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES" |
| AKBU | SECOND LEG STYLE | CHAMFERED ENDS" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL" |
| CWPG | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL" |
| FEAT | SPECIAL FEATURES | SECOND LEG HOLE HAS 2 PROJECTED CUTOUTS,1 CUTOUT 0.188 IN. W,EXTENDS FROM HOLE EDGE TO SIDE,1 CUTOUT 0.095 IN. W EXTENDS TO 0.313 IN. FROM EDGE" |
| MATT | MATERIAL | ALUMINUM ALLOY 6063" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/9,T52 FED SPEC SINGLE MATERIAL RESPONSE" |
| SFTT | SURFACE TREATMENT | ANODIZE" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE I,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
