If you are in need of NSN parts such as YZ280317, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Funk Mfg Co Sub Of Deere And Co.
Note : We will not share your information to any third parties.
Each of our NSN 3020005636676 parts like YZ280317 by Funk Mfg Co Sub Of Deere And Co is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Funk Mfg Co Sub Of Deere And Co and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-563-6676 Item Description: Gear Spur | 3020 | 005636676 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Yz280317 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 13 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 5.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 35" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 1.6250 INCHES NOMINAL BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 60.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.285 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.5000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.120 INCHES BOTH ENDS" |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.750 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS BOTH ENDS" |
| CWWH | END NOMINAL LENGTH | 0.630 INCHES BOTH ENDS" |
| CWWN | END NOMINAL DIAMETER | 2.166 INCHES BOTH ENDS" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.490 INCHES BOTH ENDS" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS" |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.600 INCHES BOTH ENDS" |
| CWXL | SECOND STEP NOMINAL DIAMETER | 3.160 INCHES BOTH ENDS" |
| MATT | III MATERIAL | STEEL COMP 8620 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 8620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 13 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 5.0000 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 35" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 1.6250 INCHES NOMINAL BOTH ENDS" |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL AND 60.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.285 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 20.5000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.120 INCHES BOTH ENDS" |
| CWRM | FACE NOMINAL WIDTH | 1.250 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 1.750 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 2 STEPS BOTH ENDS" |
| CWWH | END NOMINAL LENGTH | 0.630 INCHES BOTH ENDS" |
| CWWN | END NOMINAL DIAMETER | 2.166 INCHES BOTH ENDS" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.490 INCHES BOTH ENDS" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 2.500 INCHES BOTH ENDS" |
| CWXG | SECOND STEP NOMINAL LENGTH | 0.600 INCHES BOTH ENDS" |
| CWXL | SECOND STEP NOMINAL DIAMETER | 3.160 INCHES BOTH ENDS" |
| MATT | III MATERIAL | STEEL COMP 8620 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 8620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
