If you are in need of NSN parts such as NAS1164-30L, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Emhart Teknologies Llc.
Note : We will not share your information to any third parties.
Each of our NSN 5305009480723 parts like NAS1164-30L by Emhart Teknologies Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Emhart Teknologies Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-948-0723 Item Description: Screw Close Tolerance | 5305 | 009480723 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Nas1164-30l | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 2.285 INCHES MINIMUM AND 2.315 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM" |
| AAUM | LOCKING FEATURE | STRIP THREADS" |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
| MATT | MATERIAL | PLASTIC LOCKING FEATURE" |
| MATT | MATERIAL | STEEL COMP 4140 FASTENER OR STEEL COMP E4340 FASTENER OR STEEL COMP 8740 FASTENER" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER" |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER AND CHROMATE FASTENER" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1164 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 2.285 INCHES MINIMUM AND 2.315 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM" |
| AAUM | LOCKING FEATURE | STRIP THREADS" |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET)" |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES" |
| ANEE | GRIP LENGTH | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 28" |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH" |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP" |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS" |
| MATT | MATERIAL | PLASTIC LOCKING FEATURE" |
| MATT | MATERIAL | STEEL COMP 4140 FASTENER OR STEEL COMP E4340 FASTENER OR STEEL COMP 8740 FASTENER" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER" |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER AND CHROMATE FASTENER" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1164 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
