If you are in need of NSN parts such as 302840, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Slip Clutch Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Emd Millipore Corporation.
Note : We will not share your information to any third parties.
Each of our NSN 3020003609343 parts like 302840 by Emd Millipore Corporation is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Emd Millipore Corporation and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-00-360-9343 Item Description: GEAR-SLIP CLUTCH,SPUR | 3020 | 003609343 | N | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
302840 | C | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AGJS | PITCH DIAMETER | 1.4062 INCHES NOMINAL" |
AJCG | TORQUE CAPACITY | 2.00 INCH-OUNCES PRESET" |
AJLA | TEETH QUANTITY | 135" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.4271 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.460 INCHES" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.060 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
CWTN | NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.257 INCHES" |
MATT | III MATERIAL | COPPER ALLOY OVERALL" |
STYL | STYLE DESIGNATOR | ADJUSTABLE TORQUE, COIL SPRING LOADED" |
AGJS | PITCH DIAMETER | 1.4062 INCHES NOMINAL" |
AJCG | TORQUE CAPACITY | 2.00 INCH-OUNCES PRESET" |
AJLA | TEETH QUANTITY | 135" |
ANTP | BORE STYLE | PLAIN BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.4271 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.460 INCHES" |
CWNH | TOOTH FORM | STANDARD" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.060 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS" |
CWTN | NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.257 INCHES" |
MATT | III MATERIAL | COPPER ALLOY OVERALL" |
STYL | STYLE DESIGNATOR | ADJUSTABLE TORQUE, COIL SPRING LOADED" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|