If you are in need of NSN parts such as 25885, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Bevel and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Eastern Gear Corporation.
Note : We will not share your information to any third parties.
Each of our NSN 3020010134814 parts like 25885 by Eastern Gear Corporation is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Eastern Gear Corporation and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-01-013-4814 Item Description: Gear Bevel | 3020 | 010134814 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
25885 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID" |
AGJS | PITCH DIAMETER | 2.0000 INCHES NOMINAL" |
AJLA | TEETH QUANTITY | 32" |
ANTP | BORE STYLE | W/ 2 KEYWAYS BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 2.148 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.763 INCHES" |
CWMW | TEETH TYPE | STRAIGHT" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQD | PITCH ANGLE | 26.5665 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.213 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 0.200 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.787 INCHES BOTH ENDS" |
CWSN | KEYWAY NOMINAL WIDTH | 0.096 INCHES BOTH ENDS" |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.448 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END" |
CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
CWTX | HUB NOMINAL DIAMETER | 1.130 INCHES SECOND END" |
CWWH | END NOMINAL LENGTH | 0.250 INCHES FIRST END" |
CWWN | END NOMINAL DIAMETER | 1.130 INCHES FIRST END" |
CWWS | FIRST STEP NOMINAL LENGTH | 0.045 INCHES FIRST END" |
CWXB | FIRST STEP NOMINAL DIAMETER | 1.137 INCHES FIRST END" |
FEAT | SPECIAL FEATURES | SECOND END HUB HEX SHAPED,1.815 IN.WIDTH ACROSS FLATS" |
MATT | III MATERIAL | STEEL OVERALL" |
STYL | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS" |
AAQL | BODY STYLE | PLAIN, SOLID" |
AGJS | PITCH DIAMETER | 2.0000 INCHES NOMINAL" |
AJLA | TEETH QUANTITY | 32" |
ANTP | BORE STYLE | W/ 2 KEYWAYS BOTH ENDS" |
CWCD | NOMINAL OUTSIDE DIAMETER | 2.148 INCHES" |
CWFR | NOMINAL OVERALL LENGTH | 0.763 INCHES" |
CWMW | TEETH TYPE | STRAIGHT" |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES" |
CWQD | PITCH ANGLE | 26.5665 DEGREES" |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.213 INCHES BOTH ENDS" |
CWRM | FACE NOMINAL WIDTH | 0.200 INCHES" |
CWRS | BORE NOMINAL DIAMETER | 0.787 INCHES BOTH ENDS" |
CWSN | KEYWAY NOMINAL WIDTH | 0.096 INCHES BOTH ENDS" |
CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.448 INCHES BOTH ENDS" |
CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END" |
CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END" |
CWTX | HUB NOMINAL DIAMETER | 1.130 INCHES SECOND END" |
CWWH | END NOMINAL LENGTH | 0.250 INCHES FIRST END" |
CWWN | END NOMINAL DIAMETER | 1.130 INCHES FIRST END" |
CWWS | FIRST STEP NOMINAL LENGTH | 0.045 INCHES FIRST END" |
CWXB | FIRST STEP NOMINAL DIAMETER | 1.137 INCHES FIRST END" |
FEAT | SPECIAL FEATURES | SECOND END HUB HEX SHAPED,1.815 IN.WIDTH ACROSS FLATS" |
MATT | III MATERIAL | STEEL OVERALL" |
STYL | STYLE DESIGNATOR | PERIPHERAL FACE, PROTRUDING HUBS" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|