If you are in need of NSN parts such as R1513-298, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gearcase Motor and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Dorer Engineering Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3010007039676 parts like R1513-298 by Dorer Engineering Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Dorer Engineering Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-703-9676 Item Description: Gearcase Motor | 3010 | 007039676 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| R1513-298 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.445 INCHES" |
| AAJU | III OVERALL LENGTH | 3.945 INCHES" |
| AAJV | OVERALL WIDTH | 1.445 INCHES" |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM SINGLE END AND 0.2497 INCHES MAXIMUM SINGLE END" |
| ABXQ | FLATTED PORTION LENGTH | 0.375 INCHES MINIMUM SINGLE END" |
| ACDC | CURRENT TYPE | AC INPUT" |
| AGRB | FLAT DEPTH | 0.016 INCHES NOMINAL SINGLE END" |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END" |
| AKPS | DUTY CYCLE | CONTINUOUS" |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED" |
| AXCP | WINDING TYPE | SYNCHRONOUS SPLIT PHASE" |
| AXGY | MOUNTING METHOD | FLANGE" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE" |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END" |
| BFMF | COOLING METHOD | AMBIENT AIR" |
| BKPB | CURRENT RATING METHOD | LOAD" |
| BKPH | TORQUE RATING AND TYPE | 15.0 INCH-OUNCES STARTING" |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL" |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION" |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END" |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS" |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.530 INCHES" |
| CWGL | CURRENT RATING IN AMPS | 0.350 SINGLE OUTPUT" |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT" |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 70.000 LOW REVOLUTIONS PER MINUTE SINGLE END AND 90.000 HIGH REVOLUTIONS PER MINUTE SINGLE END" |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END" |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END" |
| FAAZ | PHASE | SINGLE INPUT" |
| FEAT | SPECIAL FEATURES | SHAFT HAS ADDITIONAL FLAT AT 90.0 DEG" |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD" |
| AAJT | OVERALL HEIGHT | 1.445 INCHES" |
| AAJU | III OVERALL LENGTH | 3.945 INCHES" |
| AAJV | OVERALL WIDTH | 1.445 INCHES" |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM SINGLE END AND 0.2497 INCHES MAXIMUM SINGLE END" |
| ABXQ | FLATTED PORTION LENGTH | 0.375 INCHES MINIMUM SINGLE END" |
| ACDC | CURRENT TYPE | AC INPUT" |
| AGRB | FLAT DEPTH | 0.016 INCHES NOMINAL SINGLE END" |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET" |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END" |
| AKPS | DUTY CYCLE | CONTINUOUS" |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED" |
| AXCP | WINDING TYPE | SYNCHRONOUS SPLIT PHASE" |
| AXGY | MOUNTING METHOD | FLANGE" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE" |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END" |
| BFMF | COOLING METHOD | AMBIENT AIR" |
| BKPB | CURRENT RATING METHOD | LOAD" |
| BKPH | TORQUE RATING AND TYPE | 15.0 INCH-OUNCES STARTING" |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL" |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION" |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END" |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS" |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.530 INCHES" |
| CWGL | CURRENT RATING IN AMPS | 0.350 SINGLE OUTPUT" |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT" |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 70.000 LOW REVOLUTIONS PER MINUTE SINGLE END AND 90.000 HIGH REVOLUTIONS PER MINUTE SINGLE END" |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END" |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END" |
| FAAZ | PHASE | SINGLE INPUT" |
| FEAT | SPECIAL FEATURES | SHAFT HAS ADDITIONAL FLAT AT 90.0 DEG" |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT" |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
