If you are in need of NSN parts such as DMS83059B, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Circuit Breaker and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Dla Land And Maritime.
Note : We will not share your information to any third parties.
Each of our NSN 5925006901728 parts like DMS83059B by Dla Land And Maritime is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Dla Land And Maritime and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5925-00-690-1728 Item Description: Circuit Breaker | 5925 | 006901728 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Dms83059b | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SINGLE POLE TYPE" |
| ADAQ | BODY LENGTH | 2.500 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.750 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.190 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.812 INCHES NOMINAL" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.000 INCHES NOMINAL" |
| AKPX | POLE QUANTITY | 1" |
| APNQ | ARC QUENCHING METHOD | MAGNETIC BLOWOUT" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE" |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE" |
| BBRJ | SPECIAL HANDLING FEATURE | MAGNETIC" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 700.0 MILLIAMPERES DC SINGLE LOCATION" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 32.0 DC SINGLE LOCATION" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 3000.0 DC SINGLE LOCATION" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT SINGLE LOCATION" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC SINGLE LOCATION" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY SINGLE LOCATION" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 150.0 SINGLE LOCATION" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 1 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT POLE ONE" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP SINGLE LOCATION" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 2.400 MINIMUM AT 200 PCT SINGLE LOCATION AND 7.500 MAXIMUM AT 200 PCT SINGLE LOCATION" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | EXPLOSION RESISTANT AND FUNGUS RESISTANT AND SHOCKPROOF" |
| TEST | TEST DATA DOCUMENT | 26512-GC885N0-7A55 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SCREW" |
| AAQL | BODY STYLE | SINGLE POLE TYPE" |
| ADAQ | BODY LENGTH | 2.500 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.750 INCHES NOMINAL" |
| ADTV | CASE MATERIAL | PLASTIC" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.190 INCHES NOMINAL" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.812 INCHES NOMINAL" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.000 INCHES NOMINAL" |
| AKPX | POLE QUANTITY | 1" |
| APNQ | ARC QUENCHING METHOD | MAGNETIC BLOWOUT" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE" |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE" |
| BBRJ | SPECIAL HANDLING FEATURE | MAGNETIC" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 700.0 MILLIAMPERES DC SINGLE LOCATION" |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 32.0 DC SINGLE LOCATION" |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 3000.0 DC SINGLE LOCATION" |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT SINGLE LOCATION" |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC SINGLE LOCATION" |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY SINGLE LOCATION" |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 150.0 SINGLE LOCATION" |
| CPRQ | RESET METHOD | MANUAL" |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE" |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 1 TOGGLE" |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET" |
| CPRX | ACTUATOR POSITION DESIGNATION | AT POLE ONE" |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP SINGLE LOCATION" |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES" |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 2.400 MINIMUM AT 200 PCT SINGLE LOCATION AND 7.500 MAXIMUM AT 200 PCT SINGLE LOCATION" |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | EXPLOSION RESISTANT AND FUNGUS RESISTANT AND SHOCKPROOF" |
| TEST | TEST DATA DOCUMENT | 26512-GC885N0-7A55 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING" |
| THSD | THREAD SERIES DESIGNATOR | UNC" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SCREW" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
