If you are in need of NSN parts such as 1000755, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Brace Corner and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Data Design Laboratories Corp.
Note : We will not share your information to any third parties.
Each of our NSN 5340010505049 parts like 1000755 by Data Design Laboratories Corp is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Data Design Laboratories Corp and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-050-5049 Item Description: Brace Corner | 5340 | 010505049 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 1000755 | 6 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD (NON-CORE) | MACHINED" |
| ABPX | MATERIAL THICKNESS | 0.250 INCHES NOMINAL" |
| ACHY | MOUNTING HOLE TYPE | THREADED" |
| ADLK | FIRST LEG LENGTH | 2.240 INCHES NOMINAL" |
| ADLL | SECOND LEG LENGTH | 3.690 INCHES NOMINAL" |
| AHLF | SECOND LEG WIDTH | 0.500 INCHES NOMINAL" |
| AHLK | FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM" |
| AHLX | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 1.281 INCHES NOMINAL" |
| AHLY | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 1.281 INCHES NOMINAL" |
| AHQN | FIRST LEG WIDTH | 0.500 INCHES NOMINAL" |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.156 INCHES NOMINAL" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM" |
| AJZU | FIRST LEG STYLE | SQUARE" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES" |
| AKBU | SECOND LEG STYLE | SQUARE" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES" |
| ASXK | HOLE QUANTITY | 5" |
| CRMK | ANGLE | 90.0 DEGREES NOMINAL" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| MATT | MATERIAL | STEEL" |
| SFTT | SURFACE TREATMENT | CADMIUM" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 CL 1 FED SPEC SINGLE TREATMENT RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
| AARN | FABRICATION METHOD (NON-CORE) | MACHINED" |
| ABPX | MATERIAL THICKNESS | 0.250 INCHES NOMINAL" |
| ACHY | MOUNTING HOLE TYPE | THREADED" |
| ADLK | FIRST LEG LENGTH | 2.240 INCHES NOMINAL" |
| ADLL | SECOND LEG LENGTH | 3.690 INCHES NOMINAL" |
| AHLF | SECOND LEG WIDTH | 0.500 INCHES NOMINAL" |
| AHLK | FIRST LEG HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| AHLN | SECOND LEG HOLE DIAMETER | 0.250 INCHES NOMINAL" |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM" |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM" |
| AHLX | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 1.281 INCHES NOMINAL" |
| AHLY | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 1.281 INCHES NOMINAL" |
| AHQN | FIRST LEG WIDTH | 0.500 INCHES NOMINAL" |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.156 INCHES NOMINAL" |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.220 INCHES MAXIMUM" |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES MINIMUM AND 0.218 INCHES MAXIMUM" |
| AJZU | FIRST LEG STYLE | SQUARE" |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES" |
| AKBU | SECOND LEG STYLE | SQUARE" |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | THREE HOLES" |
| ASXK | HOLE QUANTITY | 5" |
| CRMK | ANGLE | 90.0 DEGREES NOMINAL" |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL" |
| MATT | MATERIAL | STEEL" |
| SFTT | SURFACE TREATMENT | CADMIUM" |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1 CL 1 FED SPEC SINGLE TREATMENT RESPONSE" |
| STYL | STYLE DESIGNATOR | ANGLE" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
