If you are in need of NSN parts such as CEM3A3094SP-1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Capacitor Fixed Mica Dielectric and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Custom Electronics Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5910011986962 parts like CEM3A3094SP-1 by Custom Electronics Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Custom Electronics Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-198-6962 Item Description: Capacitor Fixed Mica Dielectric | 5910 | 011986962 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Cem3a3094sp-1 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINALS ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.218 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 4.420 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 3.380 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 1.668 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.860 INCHES MAXIMUM" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 3.240 INCHES NOMINAL" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.875 INCHES NOMINAL" |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED MOUNTING HOLES" |
| BWGP | SECTION QUANTITY | 4" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.020 MICROFARADS 2ND SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.020 MICROFARADS 4TH SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.050 MICROFARADS 3RD SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.500 MICROFARADS 1ST SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM" |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1000.0 DC 1ST SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 10000.0 DC 3RD SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 12000.0 DC 4TH SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 7000.0 DC 2ND SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT ALL SECTIONS" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.500" |
| CWSG | III TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD" |
| AAQL | BODY STYLE | W/THD MTG HOLE(S)/STUD(S) TERMINALS ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 0.218 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 4.420 INCHES MAXIMUM" |
| ADAT | BODY WIDTH | 3.380 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 1.668 INCHES MAXIMUM" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.860 INCHES MAXIMUM" |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 3.240 INCHES NOMINAL" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | SERIES CONNECTED" |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.875 INCHES NOMINAL" |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC" |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED MOUNTING HOLES" |
| BWGP | SECTION QUANTITY | 4" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.020 MICROFARADS 2ND SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.020 MICROFARADS 4TH SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.050 MICROFARADS 3RD SECTION" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.500 MICROFARADS 1ST SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM" |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1000.0 DC 1ST SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 10000.0 DC 3RD SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 12000.0 DC 4TH SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 7000.0 DC 2ND SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT ALL SECTIONS" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.500" |
| CWSG | III TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SOLDER STUD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
