If you are in need of NSN parts such as 10L2051A390F, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Capacitor Fixed Ceramic Dielectr and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Circuit Components Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5910010657407 parts like 10L2051A390F by Circuit Components Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Circuit Components Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-065-7407 Item Description: Capacitor Fixed Ceramic Dielectr | 5910 | 010657407 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 10l2051a390f | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM" |
| ADAQ | BODY LENGTH | 0.150 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.150 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.100 INCHES NOMINAL" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES NOMINAL" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 390.000 PICOFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM" |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION" |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -1.00/+1.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS" |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.0000" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM" |
| ADAQ | BODY LENGTH | 0.150 INCHES NOMINAL" |
| ADAT | BODY WIDTH | 0.150 INCHES NOMINAL" |
| ADAU | BODY HEIGHT | 0.100 INCHES NOMINAL" |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.100 INCHES NOMINAL" |
| AEBT | TERMINAL DIAMETER | 0.016 INCHES NOMINAL" |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S)" |
| CQBQ | CAPACITANCE VALUE PER SECTION | 390.000 PICOFARADS SINGLE SECTION" |
| CQJJ | NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM" |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION" |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION" |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION" |
| CRTP | TOLERANCE RANGE PER SECTION | -1.00/+1.00 PERCENT SINGLE SECTION" |
| CWJK | CASE MATERIAL | PLASTIC" |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS" |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000.0000" |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER" |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
