If you are in need of NSN parts such as TX1024C3-9-7A, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Camcar Llc Div Camcar Llc.
Note : We will not share your information to any third parties.
Each of our NSN 5305015054006 parts like TX1024C3-9-7A by Camcar Llc Div Camcar Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Camcar Llc Div Camcar Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-505-4006 Item Description: Screw Close Tolerance | 5305 | 015054006 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Tx1024c3-9-7a | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.564 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM" |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F18 E/F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
| ANEE | GRIP LENGTH | 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.564 INCHES NOMINAL" |
| AASB | FASTENER LENGTH | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM" |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AGAV | END ITEM IDENTIFICATION | F18 E/F" |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES" |
| ANEE | GRIP LENGTH | 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 32" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
