If you are in need of NSN parts such as 3750S-487-103, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Hybrid and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Bourns Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905011876047 parts like 3750S-487-103 by Bourns Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Bourns Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-187-6047 Item Description: Resistor Variable Hybrid | 5905 | 011876047 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | G | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 3750s-487-103 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.3750 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.493 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.400 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 NOMINAL INCHES" |
| ABWV | SHAFT DIAMETER | 0.0935 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.375 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.118 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.672 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 NOMINAL INCHES" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.003 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 96214-805179 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND 2 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.3750 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.493 INCHES NOMINAL" |
| ABPA | UNDERCUT DIAMETER | 0.400 INCHES MAXIMUM" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 0.500 NOMINAL INCHES" |
| ABWV | SHAFT DIAMETER | 0.0935 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.375 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 1.118 INCHES NOMINAL" |
| ADAV | OVERALL DIAMETER | 0.672 INCHES NOMINAL" |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 NOMINAL INCHES" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.30 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.003 INCHES" |
| AEGA | LATERAL RUNOUT | 0.003 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.002 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES" |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED" |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 PERCENT, RATED AMPERES C AND BETTER FLOORING" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 1080.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION" |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD" |
| PRMT | PRECIOUS MATERIAL | GOLD" |
| TEST | TEST DATA DOCUMENT | 96214-805179 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI" |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG AND 2 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
