If you are in need of NSN parts such as 46491, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Cylinder Assembly Hydraulic Brak and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Bendix Corp The Brake And Steeri.
Note : We will not share your information to any third parties.
Each of our NSN 2530002719967 parts like 46491 by Bendix Corp The Brake And Steeri is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Bendix Corp The Brake And Steeri and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-271-9967 Item Description: Cylinder Assembly Hydraulic Brak | 2530 | 002719967 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 46491 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE" |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES" |
| ABKW | OVERALL HEIGHT | 1.453 INCHES NOMINAL" |
| ABMK | OVERALL WIDTH | 2.016 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.750 INCHES NOMINAL" |
| AJFY | SEAT ANGLE IN DEG | 45.0" |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B" |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND" |
| AMQZ | COMPRESSED LENGTH | 2.969 INCHES NOMINAL" |
| ASBP | BORE TYPE | STRAIGHT" |
| ATEM | EXTENDED LENGTH | 3.250 INCHES NOMINAL" |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE" |
| BBJX | MOUNTING POSITION | ANY ACCEPTABLE" |
| CBBL | FEATURES PROVIDED | RUBBER BOOT" |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC" |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.250 INCHES NOMINAL" |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 20" |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER" |
| CKSF | FIRST PISTON ROD END STYLE | SLOT TYPE" |
| CLLN | UNABLE TO DECODE | UNABLE TO DECODE" |
| CLLP | PISTON ROD END SIMILARITY | IDENTICAL" |
| CLLZ | UNABLE TO DECODE | UNABLE TO DECODE" |
| CLMG | FIRST END FORK DEPTH | 0.281 INCHES NOMINAL" |
| CLMJ | FIRST END FORK SPAN WIDTH | UNABLE TO DECODE" |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION" |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.688 INCHES NOMINAL" |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.250 INCHES NOMINAL" |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION" |
| CLMT | PORT STYLE | INVERTED FLARE" |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF" |
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CLMY | PORT THREAD QUANTITY PER INCH | 24" |
| CLNB | PORT THREAD CLASS | 2B" |
| CLND | BLEEDING FEATURE QUANTITY | 1" |
| AAFZ | BODY MATERIAL | ANY ACCEPTABLE" |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES" |
| ABKW | OVERALL HEIGHT | 1.453 INCHES NOMINAL" |
| ABMK | OVERALL WIDTH | 2.016 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.750 INCHES NOMINAL" |
| AJFY | SEAT ANGLE IN DEG | 45.0" |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B" |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND" |
| AMQZ | COMPRESSED LENGTH | 2.969 INCHES NOMINAL" |
| ASBP | BORE TYPE | STRAIGHT" |
| ATEM | EXTENDED LENGTH | 3.250 INCHES NOMINAL" |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE" |
| BBJX | MOUNTING POSITION | ANY ACCEPTABLE" |
| CBBL | FEATURES PROVIDED | RUBBER BOOT" |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC" |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.250 INCHES NOMINAL" |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 20" |
| CKSD | DESIGN CHARACTERISTICS | DOUBLE ACTING SINGLE CYLINDER" |
| CKSF | FIRST PISTON ROD END STYLE | SLOT TYPE" |
| CLLN | UNABLE TO DECODE | UNABLE TO DECODE" |
| CLLP | PISTON ROD END SIMILARITY | IDENTICAL" |
| CLLZ | UNABLE TO DECODE | UNABLE TO DECODE" |
| CLMG | FIRST END FORK DEPTH | 0.281 INCHES NOMINAL" |
| CLMJ | FIRST END FORK SPAN WIDTH | UNABLE TO DECODE" |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION" |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.688 INCHES NOMINAL" |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.250 INCHES NOMINAL" |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION" |
| CLMT | PORT STYLE | INVERTED FLARE" |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF" |
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL" |
| CLMY | PORT THREAD QUANTITY PER INCH | 24" |
| CLNB | PORT THREAD CLASS | 2B" |
| CLND | BLEEDING FEATURE QUANTITY | 1" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
