If you are in need of NSN parts such as 120-259E3P15, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Screw Close Tolerance and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like B And B Specialties Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5305015209376 parts like 120-259E3P15 by B And B Specialties Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as B And B Specialties Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-520-9376 Item Description: Screw Close Tolerance | 5305 | 015209376 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 120-259e3p15 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.260 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.341 INCHES NOMINAL |
| AASK | HEAD STYLE | UNDERCUT PAN NO. 2 |
| AASL | HEAD DIAMETER | 0.547 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.127 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AGAV | END ITEM IDENTIFICATION | MV-22 (E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.938 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 5732 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 5737 FED SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 5853 FED SPEC 4TH MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.260 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 1.341 INCHES NOMINAL |
| AASK | HEAD STYLE | UNDERCUT PAN NO. 2 |
| AASL | HEAD DIAMETER | 0.547 INCHES NOMINAL |
| AASU | HEAD HEIGHT | 0.127 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.155 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AGAV | END ITEM IDENTIFICATION | MV-22 (E-NSN ISIL) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.938 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 3180 POUNDS PER SQUARE INCH |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW, SHEAR, PAN HEAD, CLOSE TOLERANCE, SHORT THREAD, SIX LOBE RECESS, 95 KSI FSU |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 5732 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 5737 FED SPEC 3RD MATERIAL RESPONSE OVERALL OR AMS 5853 FED SPEC 4TH MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
