If you are in need of NSN parts such as BA91746ISSUE1, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like At And T Corp.
Note : We will not share your information to any third parties.
Each of our NSN 3020005809957 parts like BA91746ISSUE1 by At And T Corp is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as At And T Corp and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-580-9957 Item Description: Gear Spur | 3020 | 005809957 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| Ba91746issue1 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 2.2500 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 72" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.213 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.312 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.312 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END" |
| CWWH | END NOMINAL LENGTH | 0.250 INCHES FIRST END" |
| CWWN | END NOMINAL DIAMETER | 0.562 INCHES FIRST END" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.312 INCHES FIRST END" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.875 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| AGJS | PITCH DIAMETER | 2.2500 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 72" |
| ANTP | BORE STYLE | PLAIN BOTH ENDS" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.213 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.312 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.312 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END" |
| CWWH | END NOMINAL LENGTH | 0.250 INCHES FIRST END" |
| CWWN | END NOMINAL DIAMETER | 0.562 INCHES FIRST END" |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.312 INCHES FIRST END" |
| CWXB | FIRST STEP NOMINAL DIAMETER | 0.875 INCHES FIRST END" |
| MATT | III MATERIAL | STEEL COMP 303 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
