If you are in need of NSN parts such as 200-1-228, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Astro Electronics Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905002955142 parts like 200-1-228 by Astro Electronics Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Astro Electronics Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-295-5142 Item Description: Resistor Variable Wire Wound Pre | 5905 | 002955142 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 200-1-228 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.160 INCHES MINIMUM AND 2.240 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.187 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.422 INCHES MINIMUM AND 2.558 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG" |
| AAPN | SECTION QUANTITY | 2" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 0.1865 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 2.160 INCHES MINIMUM AND 2.240 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 0.187 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES MINIMUM" |
| ABPM | BODY DIAMETER | 2.000 INCHES NOMINAL" |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0" |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0" |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL" |
| ABXF | SHAFT LENGTH | 0.605 INCHES MINIMUM AND 0.645 INCHES MAXIMUM" |
| ADAQ | BODY LENGTH | 1.555 INCHES MINIMUM AND 1.595 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.422 INCHES MINIMUM AND 2.558 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 356.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES" |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL" |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC" |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0" |
| AKPV | MOUNTING FACILITY QUANTITY | 3" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 ALL SECTIONS" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS" |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY" |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS" |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
