If you are in need of NSN parts such as G355691, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bearing Ball Duplex and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Associated Aircraft Manufacturin.
Note : We will not share your information to any third parties.
Each of our NSN 3110007273795 parts like G355691 by Associated Aircraft Manufacturin is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Associated Aircraft Manufacturin and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-727-3795 Item Description: Bearing Ball Duplex | 3110 | 007273795 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
G355691 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABMK | OVERALL WIDTH | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM" |
ABXV | BORE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM" |
ADGA | OVERALL OUTSIDE DIAMETER | 1.1249 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM" |
ADZG | LUBRICATION MATERIAL | GREASE" |
AGYE | SURFACE FINISH | GROUND" |
AGYF | RETAINER FABRICATION METHOD | PRESSED" |
AGYK | SHIELD QUANTITY | 2" |
AGZC | LOAD DIRECTION | RADIAL" |
AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL" |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7" |
CTHQ | BEARING PRELOAD RATING | 10.0 POUNDS NOMINAL" |
FEAT | SPECIAL FEATURES | INTERNAL CLEARANCE MEASURED UNDER 1 LB LOAD" |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE" |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING" |
ABMK | OVERALL WIDTH | 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM" |
ABXV | BORE DIAMETER | 0.4998 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM" |
ADGA | OVERALL OUTSIDE DIAMETER | 1.1249 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM" |
ADZG | LUBRICATION MATERIAL | GREASE" |
AGYE | SURFACE FINISH | GROUND" |
AGYF | RETAINER FABRICATION METHOD | PRESSED" |
AGYK | SHIELD QUANTITY | 2" |
AGZC | LOAD DIRECTION | RADIAL" |
AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL" |
CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7" |
CTHQ | BEARING PRELOAD RATING | 10.0 POUNDS NOMINAL" |
FEAT | SPECIAL FEATURES | INTERNAL CLEARANCE MEASURED UNDER 1 LB LOAD" |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE" |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL" |
STYL | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
|