If you are in need of NSN parts such as 331804, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Gear Spur and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Arrow Gear Company Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3020005676696 parts like 331804 by Arrow Gear Company Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Arrow Gear Company Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-567-6696 Item Description: Gear Spur | 3020 | 005676696 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 331804 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 16 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 1.1667 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 7" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 0.5000 INCHES NOMINAL BOTH ENDS" |
| CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.500 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 28.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.811 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.249 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.560 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.686 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.075 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 0.617 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.070 INCHES FIRST END" |
| FEAT | SPECIAL FEATURES | COUNTERBORE 2ND END; 0.688 IN. DIA; 0.690 IN. DEEP" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
| AAQL | BODY STYLE | PLAIN, SOLID" |
| ABSA | SPLINE QUANTITY | 16 BOTH ENDS" |
| AGJS | PITCH DIAMETER | 1.1667 INCHES NOMINAL" |
| AJLA | TEETH QUANTITY | 7" |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS" |
| BDTX | SPLINE PITCH DIAMETER | 0.5000 INCHES NOMINAL BOTH ENDS" |
| CQFM | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.500 INCHES" |
| CWNH | TOOTH FORM | STANDARD" |
| CWPP | PRESSURE ANGLE | 28.0000 DEGREES" |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.811 INCHES FIRST END" |
| CWRM | FACE NOMINAL WIDTH | 1.249 INCHES" |
| CWRS | BORE NOMINAL DIAMETER | 0.560 INCHES BOTH ENDS" |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END" |
| CWTX | HUB NOMINAL DIAMETER | 0.686 INCHES FIRST END" |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.075 INCHES FIRST END" |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 0.617 INCHES FIRST END" |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.070 INCHES FIRST END" |
| FEAT | SPECIAL FEATURES | COUNTERBORE 2ND END; 0.688 IN. DIA; 0.690 IN. DEEP" |
| MATT | III MATERIAL | STEEL OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
