If you are in need of NSN parts such as B16-24, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Elbow Flange and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like American National Standards Inst.
Note : We will not share your information to any third parties.
Each of our NSN 4730008471280 parts like B16-24 by American National Standards Inst is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as American National Standards Inst and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-847-1280 Item Description: ELBOW,FLANGE | 4730 | 008471280 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| B16-24 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AECS | BOLT HOLE QUANTITY | 8 1ST END" |
| AEHZ | MAXIMUM OPERATING TEMP | 207.8 DEG CELSIUS 2ND RESPONSE" |
| AEHZ | MAXIMUM OPERATING TEMP | 260.0 DEG CELSIUS 1ST RESPONSE" |
| AHSJ | LEG LENGTH | 3.969 INCHES MINIMUM 1ST END AND 4.031 INCHES MAXIMUM 1ST END" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE 1ST END" |
| CQGM | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH 1ST RESPONSE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 225.0 POUNDS PER SQUARE INCH 2ND RESPONSE" |
| CRFY | FLOW ANGLE | 45.0 DEGREES" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.688 INCHES 1ST END" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.750 INCHES 1ST END" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 7.500 INCHES 1ST END" |
| CWDF | FLANGE FACE DESIGN | PLAIN 1ST END" |
| MATT | MATERIAL | COPPER ALLOY OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 OR B62 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| AECS | BOLT HOLE QUANTITY | 8 1ST END" |
| AEHZ | MAXIMUM OPERATING TEMP | 207.8 DEG CELSIUS 2ND RESPONSE" |
| AEHZ | MAXIMUM OPERATING TEMP | 260.0 DEG CELSIUS 1ST RESPONSE" |
| AHSJ | LEG LENGTH | 3.969 INCHES MINIMUM 1ST END AND 4.031 INCHES MAXIMUM 1ST END" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE 1ST END" |
| CQGM | MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH 1ST RESPONSE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 225.0 POUNDS PER SQUARE INCH 2ND RESPONSE" |
| CRFY | FLOW ANGLE | 45.0 DEGREES" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.688 INCHES 1ST END" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.750 INCHES 1ST END" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 7.500 INCHES 1ST END" |
| CWDF | FLANGE FACE DESIGN | PLAIN 1ST END" |
| MATT | MATERIAL | COPPER ALLOY OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B61 OR B62 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
