If you are in need of NSN parts such as 1168 1698, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Valve Float and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Am General Llc.
Note : We will not share your information to any third parties.
Each of our NSN 4820001558276 parts like 1168 1698 by Am General Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Am General Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4820-00-155-8276 Item Description: Valve Float | 4820 | 001558276 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 1168 1698 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| ADQU | FLOW CONTROL DEVICE | NEEDLE" |
| AECS | BOLT HOLE QUANTITY | 6 1ST END" |
| AEHZ | MAXIMUM OPERATING TEMP | 135.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| AHNC | CONNECTION STYLE | INVERTED FLARE(TUBE) 2ND END" |
| AQLR | VALVE OPERATION METHOD | MANUAL" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 45.0 DEGREES 2ND END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.260 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.062 INCHES 1ST END" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.225 INCHES 1ST END" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 2.750 INCHES 1ST END" |
| CWDF | FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END" |
| CWDH | RAISED FACE NOMINAL HEIGHT | 0.250 INCHES" |
| CWDL | RAISED FACE NOMINAL DIAMETER | 1.980 INCHES" |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.188 INCHES 2ND END" |
| MATT | MATERIAL | PLASTIC ACETAL FLOW CONTROL DEVICE" |
| MATT | MATERIAL | STEEL BODY" |
| STYL | STYLE DESIGNATOR | STRAIGHT THRU" |
| TEST | TEST DATA DOCUMENT | 19207-11681698 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
| AAJD | THREAD CLASS | 2B 2ND END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END" |
| ADQU | FLOW CONTROL DEVICE | NEEDLE" |
| AECS | BOLT HOLE QUANTITY | 6 1ST END" |
| AEHZ | MAXIMUM OPERATING TEMP | 135.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| AHNC | CONNECTION STYLE | INVERTED FLARE(TUBE) 2ND END" |
| AQLR | VALVE OPERATION METHOD | MANUAL" |
| ARKN | FLANGE SHAPE | ROUND WITH HOLES 1ST END" |
| AWLS | CONNECTION TYPE | FLANGE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END" |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES 2ND END" |
| CQRB | SEAT ANGLE | 45.0 DEGREES 2ND END" |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.260 INCHES 1ST END" |
| CWCK | NOMINAL THICKNESS | 0.062 INCHES 1ST END" |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.225 INCHES 1ST END" |
| CWCT | BOLT CIRCLE NOMINAL DIAMETER | 2.750 INCHES 1ST END" |
| CWDF | FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END" |
| CWDH | RAISED FACE NOMINAL HEIGHT | 0.250 INCHES" |
| CWDL | RAISED FACE NOMINAL DIAMETER | 1.980 INCHES" |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.188 INCHES 2ND END" |
| MATT | MATERIAL | PLASTIC ACETAL FLOW CONTROL DEVICE" |
| MATT | MATERIAL | STEEL BODY" |
| STYL | STYLE DESIGNATOR | STRAIGHT THRU" |
| TEST | TEST DATA DOCUMENT | 19207-11681698 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA" |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
