If you are in need of NSN parts such as 12460369-6, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Shaft Axle Automotive and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Am General Llc.
Note : We will not share your information to any third parties.
Each of our NSN 2520014744012 parts like 12460369-6 by Am General Llc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Am General Llc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-4012 Item Description: Shaft Axle Automotive | 2520 | 014744012 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 12460369-6 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 25.000 INCHES MINIMUM AND 25.470 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR LEFT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 25.000 INCHES MINIMUM AND 25.470 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR LEFT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
