If you are in need of NSN parts such as 9-47388, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Bearing Roller Rod End and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Airtronics Inc.
Note : We will not share your information to any third parties.
Each of our NSN 3110005162415 parts like 9-47388 by Airtronics Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Airtronics Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-516-2415 Item Description: Bearing Roller Rod End | 3110 | 005162415 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 9-47388 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AAZE | SHANK DIAMETER | 0.8750 INCHES NOMINAL" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED W/SLOT" |
| ABHP | OVERALL LENGTH | 4.5200 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.8800 INCHES NOMINAL" |
| AGGY | SHANK THREAD LENGTH | 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM" |
| AGVT | OUTER RING WIDTH | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
| AGVU | INNER RING WIDTH | 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM" |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 3.0800 INCHES NOMINAL" |
| AGYF | RETAINER FABRICATION METHOD | PRESSED" |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING" |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL" |
| CMLP | THREAD QUANTITY PER INCH | 14" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES" |
| MATT | MATERIAL | STEEL ALIGNMENT RING" |
| MATT | MATERIAL | STEEL COMP E4340 SHAFT" |
| MATT | MATERIAL | STEEL INNER RING" |
| MATT | MATERIAL | STEEL OUTER RING" |
| MATT | MATERIAL | STEEL RETAINER" |
| MATT | MATERIAL | STEEL ROLLER" |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED" |
| STYL | STYLE DESIGNATOR | NEEDLE ROLLER" |
| THSD | THREAD SERIES DESIGNATOR | UNF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AAZE | SHANK DIAMETER | 0.8750 INCHES NOMINAL" |
| AAZF | SHANK STYLE | EXTERNALLY THREADED W/SLOT" |
| ABHP | OVERALL LENGTH | 4.5200 INCHES NOMINAL" |
| ABXV | BORE DIAMETER | 0.7493 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM" |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.8800 INCHES NOMINAL" |
| AGGY | SHANK THREAD LENGTH | 1.1000 INCHES MINIMUM AND 1.1600 INCHES MAXIMUM" |
| AGVT | OUTER RING WIDTH | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM" |
| AGVU | INNER RING WIDTH | 1.1200 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM" |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 3.0800 INCHES NOMINAL" |
| AGYF | RETAINER FABRICATION METHOD | PRESSED" |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING" |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL" |
| CMLP | THREAD QUANTITY PER INCH | 14" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES" |
| MATT | MATERIAL | STEEL ALIGNMENT RING" |
| MATT | MATERIAL | STEEL COMP E4340 SHAFT" |
| MATT | MATERIAL | STEEL INNER RING" |
| MATT | MATERIAL | STEEL OUTER RING" |
| MATT | MATERIAL | STEEL RETAINER" |
| MATT | MATERIAL | STEEL ROLLER" |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED" |
| STYL | STYLE DESIGNATOR | NEEDLE ROLLER" |
| THSD | THREAD SERIES DESIGNATOR | UNF" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
