If you are in need of NSN parts such as 200C, look no further than Aerospace Store. Owned and operated by ASAP Semiconductor, a leading aerospace and defense distributor, Aerospace Store has access to an inventory of more than two billion new and obsolete parts including Resistor Variable Wire Wound Pre and much more.
Anything not in our inventory can be found through our international supply chain network that spans the United States. Additionally, Aerospace Store upholds a strict no China sourcing policy, guaranteeing that each part you buy from us is fully traceable or comes directly from a trusted manufacturer like Ace Electronics Inc.
Note : We will not share your information to any third parties.
Each of our NSN 5905006100551 parts like 200C by Ace Electronics Inc is readily available with short lead times and competitive prices. Aerospace Store boasts a broad selection of in-demand parts from manufacturers such as Ace Electronics Inc and others. To get in touch with a dedicated account manager, simply submit an RFQ. To do this, enter the part number you want, the quantity needed, and when you need the parts by.
After this, enter some basic contact information and submit. Our team of account managers is standing by and will respond to all RFQ’s in 15 minutes or less.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-610-0551 Item Description: Resistor Variable Wire Wound Pre | 5905 | 006100551 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | isc | rnvc | rncc | HCC | MSDS | SADC |
| 200c | 6 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8745 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.703 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 2.093 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.938 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.346 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.9850 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 10001-1578127 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| AAVL | PILOT DIAMETER | 1.8745 INCHES NOMINAL" |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL" |
| ABHP | OVERALL LENGTH | 1.703 INCHES MAXIMUM" |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL" |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL" |
| ABPM | BODY DIAMETER | 2.093 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM" |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL" |
| ADAQ | BODY LENGTH | 0.938 INCHES MAXIMUM" |
| ADAV | OVERALL DIAMETER | 2.346 INCHES MAXIMUM" |
| AECZ | MOUNTING LIP DIAMETER | 1.9850 INCHES NOMINAL" |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL" |
| AEDX | SHAFT STYLE | ROUND" |
| AEDZ | SHAFT BEARING TYPE | BALL" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL" |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES" |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES" |
| AEFY | SHAFT END PLAY | 0.005 INCHES" |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES" |
| AEGA | LATERAL RUNOUT | 0.002 INCHES" |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES" |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES" |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE" |
| AXGY | MOUNTING METHOD | CLAMP RING" |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION" |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL" |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION" |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS" |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION" |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION" |
| TEST | TEST DATA DOCUMENT | 10001-1578127 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET" |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
 |
|
