ASAP Semiconductor

Distributed I-o Equipment Parts List

At the Aerospace Store, we offer the industry’s largest selection of parts with civil and military applications for the aerospace, marine, and commercial markets. You can find Distributed I-o Equipment connector part such as 189935-01, 189935-01, 778618-01, 778618-03, 778618-11 from quality manufacturers like National Aerospace Standards Co. Additionally, we provide the most accessible parts platform of any distributor, which allows you to browse all electrical connector parts from top brands like Amphenol, Bb Electronics, and more. Quality control is a priority with the team at the Aerospace Store.

Owned and Operated by ASAP Semiconductor LLC, our team consists of an FAA AC-0056B accredited and ISO 9001:2015 certified member of the Aviation Suppliers Association (ASA). With an unmatched supply-chain network and locations in the US and abroad, we are a go-to for mission-critical and aircraft on ground requirements. Utilize our Instant RFQ form to get the parts you need. Aerospace Store has a comprehensive list of Distributed I-o Equipment connector parts. Get an instant quote for your needed connector part and get fast delivery.

Products

18 items
189935-01

SH37F-5B-1, I/O Cable, 37p F to 5B Connector, 1M for cFP

Min Order: 1 pc
189935-01

SH37F-5B-1, I/O Cable, 37p F to 5B Connector, 1M for cFP

Min Order: 1 pc
Min Order: 1 pc
778618-03

cFP-CB-3 Isothermal Connector Block

Min Order: 1 pc
Min Order: 1 pc
779567-01

NI 9940 Backshell for 36-pos connector block (qty 1)

Min Order: 1 pc
779729-01

cFP-180X Power Supply Connector for Compact FieldPoint

Min Order: 1 pc
780017-02

cFP-CB-2 General Purpose Connector Block with Front Accessibility

Min Order: 1 pc
780017-04

cFP-CB-4 Probeable, Front Accessible Connector Block

Min Order: 1 pc
Min Order: 1 pc
778618-03

cFP-CB-3 Isothermal Connector Block

Min Order: 1 pc
Min Order: 1 pc
779729-01

cFP-180X Power Supply Connector for Compact FieldPoint

Min Order: 1 pc
780017-02

cFP-CB-2 General Purpose Connector Block with Front Accessibility

Min Order: 1 pc
780017-04

cFP-CB-4 Probeable, Front Accessible Connector Block

Min Order: 1 pc
cfp-rly-425-8-channel-spst-form-a-relay-module-for-compact-fieldpoint

The National Instruments cFP-RLY-425 relay module has eight nonlatching single-pole single-throw (SPST), Form A relays for switching general-purpose signals and loads. The module can switch 5 A up to 18 VDC or 150 VAC, 0.2 A at 125 VDC, and 3 A at 250 VAC. The module includes 2300 V transient isolation between the output channels and the backplane. To make installation and setup easier, the NI cFP-RLY-425 features HotPnP (plug-and-play) operation, and is automatically detected and identified by the configuration software.

Min Order: 1 pc
ni-cfp-rly-421-8-channel-spst-form-a-relay-module-for-compact-fieldpoint

The National Instruments cFP-RLY-421 has eight nonlatching single-pole single-throw (SPST), Form A, relays for switching general-purpose signals and loads. The module can supply up to 1.5 A per channel at 35 VDC or 250 VAC and can switch a maximum of 120 VDC or 250 VAC. The module features 2300 V transient isolation between the output channels and the backplane. To make installation and setup easier the NI cFP-RLY-421 features HotPnP (plug-and-play) operation and will be automatically detected and identified by the configuration software. Notes: This module draws more than 1 A from the backplane. For use with hazardous voltages (greater than 42.4 V peak or 60 VDC) use the cFP-CB-1.

Min Order: 1 pc
ni-cfp-rly-423-4-channel-spdt-form-c-relay-module-for-compact-fieldpoint

The National Instruments cFP-RLY-423 has four nonlatching single-pole double-throw (SPDT), Form C relays for switching general-purpose signals and loads. The module can supply up to 1.5 A per channel at 35 VDC or 250 VAC. It can switch a maximum voltage load of up to 120 VDC or 250 VAC. The module features 2300 V transient isolation between the output channels and the backplane. To make installation and setup easier, the NI cFP-RLY-423 is hot swappable and will be automatically detected and identified by the configuration software. Notes: For applications with hazardous voltages (greater than 42.4 Vpeak or 60 VDC), use the cFP-RLY-423 with the cFP-CB-1 connector block. This module draws more than 1 W from the backplane.

Min Order: 1 pc

ASAP Semiconductor’s Certifications and Memberships

Americas Fastest Growing Private Company
ASA Member
NBAA Member
ISO 9001:2015 & AS9120B
Cage Code 6RE77
ITAR
eCustoms Visual Compliance
D-U-N-S Number 069876325
FAA 0056 B AccreditedESD S20.20AS 6081:2012
NIST 800-171 Compliance
Top Distributors 2018Top Distributors 2020Top Distributors 2025
No China Parts

The only independent distributor with a

NO CHINA SOURCING Pledge


USA Flag

All Orders are Fulfilled in the U.S.A.

All shipments must comply with U.S.A export laws.

No exceptions.


Intrepid Fallen Heroes Fund

"We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War: Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort".